VIBER 110 37

VIBER 110

The TEMPISH VIBER 110 roller skates combine a freestyle hard shoe with a speed of large 110 mm wheels.A special universal model designed both for shorter routes in the city and thanks to large wheels for trails. This skate is suitable for advanced and experienced skaters.

The skate with a hard skeleton is designed for universal use due to its construction and equipment. Thanks to the short chassis, easy maneuverability is guaranteed. The skate is basically equipped with a combination of three wheels with a size of 110 mm, thanks to which it is possible to achieve high speeds when riding. It is also possible to mount smaller wheels in the chassis (minimum recommended size 90 mm).

The skeleton of the skate is well ventilated - ventilation reaches the foot thanks to the holes on the underside of the shoe and a ventilated liner, which contains holes around its entire circumference, including the tongue. A screw with a special nut and washer is used in the skate joint, thanks to which the cuff is replaceable and can be tightened if necessary, it also guarantees a longer service life than the articulated rivet. The upper self-locking buckle is metal. The strap is inserted into the skeleton so that it does not catch on the second skate when skating. The instep strap is fitted with a single-stage micro buckle with very comfortable tightening and loosening thanks to the ratchet system.

The plastic protectors on the outside of the skates are replaceable. The holes for the laces are fitted with strong metal rings for the protection of the laces and better tightening.Thanks to the use of waxed laces with a width of 10 mm, it is possible to easily tighten the laces gradually and to close the skeleton of the skate more effectively to the foot.

The skater liner is ventilated, has holes around its entire circumference and reinforced with PVC at the back. There is an elastic neoprene in the area of the fingers to increase comfort. In the back there is a loop with the TEMPISH logo for comfortable carrying of skates. In the area of the Achilles tendon, the liner is lowered and shaped into a V-shape, which enhances maneuverability and mobility.The liner has cut-outs in the area of the ankle bend sewn with elastic neoprene, which achieves optimal anatomical dispositions of the liner while maintaining its rigidity. The lower part of the liner uses a material that slides less in the skeleton. The shoe has an anatomical insole with a thickness of 3 mm, which is comfortable enough, yet not too soft.

Under the liner in the heel part, the shock absorbing silentblock made of TPR material, which perfectly absorbs vibrations and shocks, is relatively thick, soft and comfortable.

The tongue of the liner is sufficiently stiff and thick, it consists of 2 parts, so it perfectly copies the instep of the foot. The tongue holds the position well thanks to the use of a drawstring.

The chassis made by CNC is strongly reinforced with a three-dimensional structure, very strong, stable and precise. This is the design and construction of the TEMPISH brand. The chassis is attached to the shoe with 2 central screws. The chassis can be adjusted transversely and longitudinally. The hollow axles for weight reduction have a diameter of 8 mm and are mounted on the left skate on the inside and on the right skate on the outside to prevent the screws from loosening while riding.

Chassis mounting dimensions: 165 mm

Bearings: quality ABEC-9 chrome with rubber duster for easy cleaning and maintenance

Wheels: PUC, SUPER HI-REBOUND 85A 110 * 24 mm

Size: 37- 45