?
Freestyle scooter Fuzion Z250 2020 gold
The grips on the handlebars are soft , shorter and wider . The handlebars are "Y" shaped , steel , there are slight struts . The socket here is double hex 6 with M8 screws, SCS system . The handlebars are 590 mm high and 540 mm wide.
The scooter 's board has a great design , there is a similar plastic brake as on Ethic scooters. The wheels here are 24 x 110 mm . There is an integrated headset , IHC compression system , the details on the scooter are excellently designed . The board is two-part, griptape with a nice logo . The length of the board is 500 mm, the width of the board is 120 mm and the footspace is 370 mm.
The total height of the scooter is 840 mm and the total weight of the scooter is 3,700 g.
Article about this scooter: https://www.scootshop.cz/unboxing-kolobezka-fuzion-z250/
| Freestyle scooter for | moderately advanced riders |
| Total weight | 3700 g |
| Backsweep | No |
| Height of handlebars | 590 mm |
| The width of the handlebars | 540 mm |
| Height of the handlebars from the ground | 840 mm |
| Material of the handlebars | steel |
| The shape of the handlebars | Shape Y |
| Length of the board | 500 mm |
| Plate Width | 120 mm |
| Footspace | 370 mm |
| Neck Plates | two-part |
| Clamp type | two screws |
| Wheel size | 110 mm |
| The width of the rubber wheels | 24 mm |
| Wheel width | 24 mm |
| Bearings | ABEC 9 |
| Compression system | SCS |
| Brake material | cloak |
| Color | černá |
| Dropout shape | Peg Cut (standard shape) |
| Minimum rider height: | 130 cm |
Copyright © 2023