Freestyle scooter Slamm Urban V8 red

The handlebars of the scooter are classic, steel, "T" shaped with an outer diameter of 32 mm and an inner diameter of 28 mm . There are also smaller struts on the handlebars, grips are standard, we like the ends , they really worked for us. The sleeve is three-screw , it is larger than the notch , so it hides it and only then will the handlebars themselves not crack. The screws here are M8 for hex 5 . The height of the handlebars is 585 mm and the width of the handlebars is 533 mm . There is a multi-colored SLAMM logo on the front of the handlebars.

We are also interested in the scooter board itself. There are 110 mm wheels with aluminum center and ABEC9 bearings . There are also plastic caps and the brake is classic, steel, springless and for hex 3 . There is a standard griptape on the record with a nice Slamm logo . The front of the board is again a plastic cover . The fork is aluminum, two-piece, it is welded, for integrated headsets . There are industrial bearings and an IHC compression system . The neck of the plate is welded . Integrated closed NECO headset .

The bottom of the plate has high grind rails , which is great because the weld is hidden in the plate . The length of the board is 478 mm and the width of the board is 155 mm and the footspace is 315 mm .

The total height of the scooter is 835 mm and the weight of the scooter is 3,750 g . The load capacity of the scooter is 100 kg .

Scooter specifications:

• handlebars: "T" handlebars 585 mm x 533 mm, rubber grips 165 mm and cover plugs
• three-screw sleeve
• integrated closed NECO headset
• aluminum non-threaded fork
• IHC compression system
• 110 mm wheels with aluminum centers
• ABEC9 bearings
• scooter load: 100 kg
• scooter weight: 3750 g

An article about the scooter can be found here: / unboxing-slamm-urban-v8-freestyle-kolobezka /