Product description Freestyle scooter Slamm Urban V8 Teal

The handlebars of the scooter are classic, steel, "T" shaped with an outer diameter of 32 mm and an inner diameter of 28 mm . There are also smaller struts on the handlebars, grips are standard, we like the ends , they really worked for us. The sleeve is three-screw , it is larger than the notch , so it hides it and only then will the handlebars themselves not crack. The screws here are M8 for hex 5 . The height of the handlebars is 585 mm and the width of the handlebars is 533 mm . There is a multi-colored SLAMM logo on the front of the handlebars.

We are also interested in the scooter board itself. There are 110 mm wheels with aluminum center and ABEC9 bearings . There are also plastic caps and the brake is classic, steel, springless and for hex 3 . There is a standard griptape on the record with a nice Slamm logo . The front of the board is again a plastic cover . The fork is aluminum, two-piece, it is welded, for integrated headsets . There are industrial bearings and an IHC compression system . The neck of the plate is welded . Integrated closed NECO headset .

The bottom of the plate has high grind rails , which is great because the weld is hidden in the plate . The length of the board is 478 mm and the width of the board is 155 mm and the footspace is 315 mm .

The total height of the scooter is 835 mm and the weight of the scooter is 3,750 g . The load capacity of the scooter is 100 kg .

Scooter specifications:

handlebars: "T" handlebars 585 mm x 533 mm, rubber grips 165 mm and cover plugs
three-screw sleeve
integrated closed NECO headset
aluminum non-threaded fork
IHC compression system
110 mm wheels with aluminum centers
ABEC9 bearings
scooter load: 100 kg
scooter weight: 3750 g