Freestyle scooter Slamm Urban V9 Black / Teal

The handlebars of the scooter are classic, steel, "T" shaped with an outer diameter of 32 mm and an inner diameter of 28 mm . There are also smaller struts on the handlebars, grips are standard, we like the ends , they really worked for us. The sleeve is double-screwed , it is larger than the notch , so it hides it and only then the handlebars themselves will not crack. The screws here are M8 for hex 5 . The height of the handlebars is 590 mm and the width of the handlebars is 538 mm . There is a multi-colored SLAMM logo on the front of the handlebars.

We are also interested in the scooter board itself. There are 110 mm wheels with aluminum center and ABEC9 bearings . There are also plastic caps and the brake is classic, steel, springless and for hex 3 . There is a standard griptape on the record with a nice Slamm logo . There is again a plastic cover on the front of the board.The fork is aluminum, two-piece, welded, for integrated headsets . There are industrial bearings and an IHC compression system . The neck of the plate is welded .Integrated closed NECO headset . 

The bottom of the board has high grind rails , which is great because the weld is hidden in the board . The length of the board is 495 mm and the width of the board is 115 mm and the footspace is 330 mm . 

Scooter specifications:

• handlebars: "T" handlebars 590 mm x 538 mm, rubber grips 165 mm and cover plugs
• three-screw sleeve
• integrated closed headset NECO
• aluminum non-threaded fork
• IHC compression system
• 110 mm wheels with aluminum centers
• ABEC9 bearings
• scooter load: 100 kg