Multifunctional fitness rack - Power Rack HMS KLT21 grey

The HMS Power Rack KLT22 folding weight rack has been designed to match current market trends and meet the expectations of the most demanding customers. The rack in this variant is sold with additional equipment. In addition to the trapeze, dumbbell hooks and safety supports, you will find a folding straight bench, dip adapter, wall-mounted dumbbell rack and axle holder. A kit like this will expand your training options and give you new storage space for your equipment.

Multifunctional training in a small space

The Power Rack KLT22 is fixed to the wall, which ensures its stability and safety. When not in use, you can easily fold it up so it doesn't take up much space. This is a huge advantage of this equipment as it can be used by people with limited training space. When the stand is folded against the wall, at its deepest point, it takes up only 31 cm from the wall! One of the arms is equipped with a pneumatic piston, which facilitates folding (lifting) of the stand.

Trapeze bar and dumbbell hooks

The Rack has a multi-functional trapeze for pull-ups that allows you to develop your back, shoulder and chest muscles thanks to the different grip options. Shrugs are one of the best exercises for the upper body because they engage multiple muscle groups and improve joint mobility. To simplify this exercise, just use special resistance rubbers. On the KLT22 you will also find two axle hooks that can be fixed at any height.

Safety supports

The KLT22 Power Rack also includes special supports that you can attach to the rack frame to ensure maximum safety when training with heavy weights. The supports can be attached at almost any height and can be used to perform exercises such as bench press or squats with a barbell without having to worry about not having enough strength to push the barbell back into the hooks. With the KLT22 you can push the limits of your own strength.

Folding straight bench

Along with the cage, you will also receive a folding bench that allows you to perform exercises with one-armed, resistance bands or two-armed dumbbells. The bench is comfortable and stable and can be folded parallel to the wall after the exercise.

Adapter for dips

Another accessory on the KLT22 is a dip adapter that attaches to the frame of the Rack. Dips are an effective exercise for the triceps, shoulder and pectoral muscles. The adapter has comfortable handles and is easy to install and remove. It can be mounted at different heights to adapt it to your height. The dip adapter is easy to maintain and long-lasting. You will also receive a special wall bracket on which you can hang the adapter.

Wall stand for weights

With the KLT22 set, you place the weights on a special stand that attaches to the wall. This saves floor space and gives you easy access to the discs. The stand is made of durable materials. It has 6 handles that can accommodate discs of different diameters and thicknesses. Each holder has a rubber cover to protect the weights from scratches and noise. Its maximum load capacity is up to 1000 kg!

Wall stand for axes

The last part of the set is a wall bracket on which two axes can be hung. Loading axles are essential accessories for strength training to strengthen the muscles of the whole body. The holder allows you to keep the axles tidy so they don't take up space on the floor.

Note: The height of the stand when folded is 276 cm. If you want to use the folding function and your room is too low, we will shorten it by the required length free of charge at your request.

Parameters:

• material: steel, synthetic leather, PVC, rubber
• Area required for assembly: 150 x 150 cm


• Power Rack KLT22
:
• Dimensions of the structure in working position:
• Height: 230 cm
• Width: 142 cm
• Depth: 75 cm
• Dimensions of the structure when folded against the wall:
• Height: 276 cm
• Width: 142 cm
• Depth: 31 cm
• Outer width between frames: 124 cm
• Inner width between frames: 109 cm
• Frame profile: 75 x 75 x 3.5 mm
• Holes for accessories: 21 (5.5 cm each)
• Load capacity: 300 kg


• Axle hooks
:
• Width: 7.5 cm
• Height: 17 cm
• Height adjustment: 48 - 164 cm


• Straight bench
:
• Material: steel, synthetic leather, PVC
• Length: 100 cm
• Distance from the wall: 140 cm
• Height: 48 cm
• Height when folded against the wall: 140 cm


• Adapter for dips
:
• Material: steel
• Arm distance: 35 - 53 cm
• Shoulder diameter: 4 cm
• Arm length: 58 cm
• Total length: 95 cm
• Height adjustment: 90 - 190 cm


• Safety supports
:
• Material: steel, TPR
• Length: 60 cm
• Width: 5 cm
• Height adjustment: 90 - 170 cm


• Weight rack:
• Material: steel, rubber
• Height: 200 cm
• Width: 59 cm
• Pegs: 6 pcs, 20 x 5 cm
• Load capacity: up to 1.000 kg


• Wasp stand
:
• Material: steel
• Height: 13 cm
• Width: 16 cm
• Depth: 10 cm
• Axle hole diameter: 3.5 cm
• Number of axles: 2

Notice:

• Anchoring material is not included. The load capacity is related to the wall material and the anchoring material used.
• Class: H, not for commercial use
• 24 months warranty