MARBO Power Rack MS-U115 2.

Power Rack MARBO Sport MS-U115 2.0 is ideal for training with your own weight, with a large barbell or for training on a punching bag.

The construction is made of 50 x 50 x 2 mm steel profile on precision CNC machines. The chosen material and manufacturing process guarantee trouble-free assembly, high stability and a load capacity of up to 250 kilograms.

On the upper profile there is a "trapeze" with a pair of grips that allow you to train overhand, underhand and wide grip pull-ups. The handrails are located at a height of 208 cm. In the middle of the trapeze is a steel eye for hanging, for example, a punching bag.

On the sides of the frame there are 7 pairs of hooks for the weightlifting axle. The hooks have a height range from 73 to 155 cm and the distance between them is 123 cm. The hooks are assisted by safety struts, which have a pin that is inserted into the hole at the desired height and then the strut is rotated to secure it. Thanks to gravity, the barbell stays firmly in place, so you don't have to worry about safety even when training with a very heavy barbell. The struts can be adjusted to 4 positions in a height range from 75 to 118 cm.

On the inside of the frame there are supports for the handles, they have a diameter of 3 cm and can be placed in 2 levels. 1. position at 105 centimetres allows DIP training, 2. the 17 cm position allows you to train deep push-ups. Each support is equipped with 3 spacing adjustment holes (total of 5 width settings ranging from 56 to 74 cm). The supports are secured with a steel securing pin.

At the back of the frame there are spikes that serve as a stand for putting down weights, the spikes are 19 centimetres long and 2.5 cm in diameter. The suspended weights also increase the stability of the structure when it is not anchored to the floor. Under the left strut you can still find the axle stand with a loading section diameter of 30 millimetres. In the front part of the stabilizer there is a so-called mine - a multi-axis joint for training with the axis./p>

The stabilizers are fitted with rubber end caps, these end caps protect the floor from damage and also increase the stability of the structure. The frame can also be anchored to the floor using pre-drilled holes.

Parameters:

• material: steel profile 50x50x2 mm
• Dimensions
:
• length: 119 cm
• width: 123 cm
• height: 211 cm
• hooks for removing dumbbells
:
• number of hooks: 7
• height range: 73 - 155 cm
• handlebar supports
:
• diameter: 3 cm
• height adjustment: 17 and 105 cm
• spacing: 5 positions, 56 - 74 cm
• Axis diameter: max. 3 cm
• Capacity: 250 kg
• Weight: 46 kg

Warning:

• Certificate, standard: not for commercial use
• Warranty 24 months