VIBER L.E. 110
Roller skates TEMPISH VIBER L.E. the 110 combines a freestyle hard shoe with the speed of big 110 mm wheels.a special universal model designed for shorter routes in the city as well as for trails thanks to the large wheels. This skate is suitable for advanced and experienced skaters.
The skate with a hard skeleton is designed for universal use. Thanks to the short chassis, easy manoeuvrability is guaranteed. The skate is basically equipped with a combination of three 110 mm wheels, thanks to which it is possible to achieve high speeds when skating. Smaller castors can be mounted in the chassis (minimum recommended size 90 mm).
The skeleton of the skate is well ventilated - ventilation reaches the foot thanks to the holes on the bottom of the shoe and the ventilated liner, which contains holes all around its perimeter, including the tongue. In the joint of the skate is used a screw with a special nut and washer, thanks to which the cuff is replaceable and can be tightened if necessary, also guarantees a longer life than the joint rivet. The upper self-locking buckle is metal. The belt is retracted into the skeleton to prevent it from catching on the other skate when skating. The ankle strap is fitted with a one-stage micro-strap with very comfortable tightening and loosening thanks to the ratchet system. The laces used are waxed, less slippery and easier to pull on.
The plastic protectors on the outside of the skates are replaceable. Lace holes are fitted with strength metal rings to protect the laces and improve tightening.thanks to the use of waxed laces with a width of 10mm, it is possible to tighten the laces more easily and more effectively close the skeleton of the skate to the foot.
The liner of the skate is ventilated, has holes all around its perimeter and is reinforced with PVC in the back. There is elastic neoprene in the toe area for added comfort. At the back there is a strap with TEMPISH logo for convenient carrying of the skates. There is a strap on the tongue for easy slipping on. In the Achilles tendon area, the liner is lowered and shaped into a V-shape, which enhances manoeuvrability and mobility. The liner has cut-outs in the ankle flexion area stitched over with elastic neoprene, which achieves optimal anatomical disposition of the liner while maintaining its stiffness. Under the cuff there are additional eyelets for laces to achieve optimal fixation of the leg in the liner. The material used for the bottom of the liner is less slippery in the skeleton. The shoe has an anatomical insole with a thickness of 3mm, which is comfortable enough, yet not too soft.
Underneath the liner in the heel section, the shock-absorbing silentblock made of TPR material absorbs vibrations and shocks excellently, is quite thick, soft and comfortable.
The tongue of the liner is sufficiently stiff and thick, consisting of 2 parts, so it perfectly follows the instep of the foot. The tongue holds the position well thanks to the use of a tightening elastic.
The chassis made by CNC is heavily reinforced with space structure, very strong, stable and precise. This is TEMPISH's own design and construction. The chassis is attached to the shoe by 2 central screws. The chassis can be adjusted laterally and longitudinally. The hollow weight-reducing lugs have a diameter of 8mm and are mounted on the inside of the left skate and on the outside of the right skate to prevent the screws from loosening when driving.
Chassis mounting dimensions: 165 mm
Bearings: quality ABEC-9 chrome with rubber dust cap for easy cleaning and maintenance
Wheels: PUC, SUPER HI-REBOUND 85A 110*24 mm
Size: 37- 45
Inner liner length:
Great.: 37 - 23,6cm
Great.: 38 - 24,5cm
Great.: 39 - 25,2cm
Great.: 40 - 25,9cm
Great.: 41 - 26,6cm
Great.: 42 - 27,6cm
Great.: 43 - 28,3cm
Great.: 44 - 29,0cm
Great.: 45 - 29,7cm